Punches

This Center Punch Tool is used to aid in drilling. The impression made by a center punch into wood, plastic or metal marks the area to be drilled and helps the drill stay on course as it goes through the material.

P/N 425 152 0

  • Set of Parallel Pin Punches
  • 5-piece set with handguard in plastic case
  • one of each 3/32",1/8",5/32",3/16",1/4"
  • Manufactured from high-grade German tool steel
  • Heat-treated for the perfect balance of hardness, strength and durability
  • Industrial quality

Improved quality, polished surface, rounded edges, chrome vanadium steel and laquered.

Request a Quote!

P/N 425 500 6 R

  • Set contains six pin punches
    • one of each 1/8", 5/32", 3/16", 1/4", 5/16", 3/8"
  • Color coded for easy identification and selection
  • Made from High-alloy tool steel, tempered through, >58 HRC
  • Heat-treated for the perfect balance of hardness, strength and durability
  • Meets DIN 6450 standard
  • Industrial quality
  • Quenched to guarantee superior performance and a long service life

Tempered safety striking head, powder coated, all edges of the pin punches are rounded

Request a Quote!

The best way to determine the center of a hole.

  • A better solution compared to a standard transfer punch
  • For exactly, offset-free centering on workpieces
  • Perfect alignment of the slitted centering sleeve in masterpiece or drilling jig with knurled screw
  • Special hardened and tempered, passing centering punch - resharpenable
  • Spare pins available
  • Material: special tool steel
  • Industrial quality

P/N 430 143

The best way to determine the center of a hole.

  • A better solution compared to a standard transfer punch
  • For exactly, offset-free centering on workpieces
  • Perfect alignment of the slitted centering sleeve in masterpiece or drilling jig with knurled screw
  • Special hardened and tempered, passing centering punch - resharpenable
  • Spare pins available
  • Material: special tool steel
  • Industrial quality

Request a Quote!

P/N 424 142 0

  • Set of starter (solid punches) punches with handguard in plastic case
  • Tip ground and polished surfaces & rounded edges
    • 3/32" ground (similar to 2mm)
    • 1/8" ground (similar to 3mm)
    • 5/32" ground (similar to 4mm)
    • 3/16" ground (similar to 5mm)
    • 1/4" ground (similar to 6mm)
  • Manufactured from high-grade German tool steel
  • Heat-treated for the perfect balance of hardness, strength and durability
  • Industrial quality

Request a Quote!

P/N 457 102 5

  • Parallel Pin Punches with Guide Sleeves
  • Unique set for driving pins into or out of a workpiece easily
  • Manufactured from high-grade German tool steel
  • Heat-treated for the perfect balance of hardness, strength and durability
  • Tip dia. 0.9 mm /1.4 mm /1.8 mm /2.4 mm /2.8 mm /3.4 mm /3.9 mm / 5.9 mm (similar to 1/32"-15/64")
  • For installing and removing roll pins from pistols and rifles
  • Industrial quality

Request a Quote!

P/N 421 102 0

  • Tool Set of 5 pieces with handguard in plastic case
  • 1 Flat cold chisel 125 mm similar to 5"
  • 1 Crosscut chisel 125 mm similar to 5" 
  • 1 Center punch 3/8"
  • 1 Starter (Taper) punch, tip dia. 3 mm - similar to 1/8"
  • 1 Starter (Taper) punch, tip dia. 4 mm - similar to 5/32"
  • Manufactured from high-grade German tool steel
  • Heat-treated for the perfect balance of hardness, strength and durability
  • Industrial quality

Request a Quote!

P/N 425 170 09

Set contains six pin punches

  • 1x Parallel Pin Punch with Tip Ø 2mm (3/32" x 6)
  • 1x Parallel Pin Punch with Tip Ø 3mm (1/8" x 6)
  • 1x Parallel Pin Punch with Tip Ø 4mm (5/32" x 6)
  • 1x Parallel Pin Punch with Tip Ø 5mm (3/16" x 6)
  • 1x Parallel Pin Punch with Tip Ø 6mm (1/4" x 6)
  • 1x Parallel Pin Punch eith Tip Ø 8mm (5/16" x 6)

Request a Quote!

P/N 425 502 6

  • Set of Parallel Pin Punches
  • 5-piece set with handguard in plastic case
  • one of each 3/32",1/8",5/32",3/16",1/4"
  • Manufactured from high-grade German tool steel
  • Heat-treated for the perfect balance of hardness, strength and durability
  • Industrial quality

High-alloy tool steel, tempered through >58 HRC, tempered safety striking head, powder coated, all edges of the pin punches are rounded.

Request a Quote!

P/N 426 017

  • Manufactured from high-grade German tool steel
  • Heat-treated for the perfect balance of hardness, strength and durability
  • 2-component handle with interchangeable tips:
  • 5 starter (taper) punches, dia. 3-8 mm (similar to 1/8" to 5/16")
  • 5 pin punches, dia. 3-8 mm (similar to 1/8" to 5/16")
  • 1 center punch
  • 4 brass tips for working on sensitive workpieces, dia. 4-8 mm (similar to 5/32" to 5/16")
  • In plastic case
  • Industrial quality

Request a Quote!

Main Menu