Screw Extractor (Easy-Outs)

How it works!

Mark screw/bolt to be removed by using the centering point of the Screw Extractor. Open the screw/bolt by drillining with an adequate drill. Drive the Screw Extractor into the bore hole until the cutting edges are in full contact with the screw/bolt. Screw Extractor - Application 1
Use a Wrench or Tap Wrench to remove the screw/bolt out of the thread hole by turning the Screw Extractor clockwise or anticlockwise depending on thread. After unscrewing the ruined screw/bolt from the Screw Extractor. Screw Extractor - Application 2

 

Main Menu